Pinterest Share on Tumblr Delicious Share on Facebook Share on newsvine Share on FriendFeed

relay switch

 The Fibaro control element allows the retrofit of a standard electric installation in an intelligent Z-Wave-based system. The device is placed into a conventional wall outlet directly behind the circuit breaker is already located there. Not directly on the switch to the consumer, but now only supplies a control signal to Fibaro device that in turn controls the consumers. This control is either via the local switch or radio.


This product works with any switch series and any design as long as enough space in the mounting box for installation is included.In large doses 65 mm deep, this should normally be the case. In small doses (eg 45 mm) the possible application of the required depth of the space required by conventional switch and where appropriate also within the box electrical connector

relay switch

 Like the double relay switch Fibaro, the small size of this product allows it to be used for installation within the console box of a contact directly to the device you want to control.

  • He can participate in low-voltage grid (24-60VDC).
  • Enable Z-Wave control of lights and appliances
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
  • support 2.5 KW